Image

BDG-2 Compact Copper Chopper

BGD-2 Compact Ganulator
Type of Granulation Process: Dry-type copper recycling system
Total Production Output / Day = 1650 to 2600 lbs
Purity Level: 99.9%

Features:

Nice Compact Design.
Low Maintenance.
PLC System to Control Individual Fans / Motors
Low Noise
Feed back System to reprocess Material
Dust Collection System

Description

Compact Copper Chopper BDG-2. Granulate scrap wire and cable from .018″ up to 3/4″ diameter cable. Designed for processing, Communication Cable, computer cable, phone cable, car wiring harness, electrical house wire, multi-strand, ethernet cable.

Recycle your scrap cable into copper granules with the BDG-2 Copper Chopper.
Exclusive Features:
–High purity rate of 99.99% for recycling both copper and plastic/rubber.
–PCL System to Control Individual Fans / Motor Speeds
–Can process both Copper and Aluminum wires.
–Compact machine does not take up an excessive amount of space.
–Environmental-friendly: includes a dust collection system
–Low Noise
–Low Maintenance
–Easy 1-Person Operation

Type of Granulation Process:  Dry-type copper recycling system
Production Output / Day =  1650 to 2600 lbs

Advantages of Bluedog BDG-2 Granulator:

–    Total Output per HR: 50 to 100lbs including your plastic waste material.
–    The BDG-2 is Fraction of the cost of a Large Scale Granulator System
–    Compact design includes fork lift channels.  Which means it’s easy to move around your shop.
–    Heavy Duty Made from Super Thick Metal
–    High Purity Recovery Rate 99.9%+
–    Requires 1 Operator for normal operation
–    Heavy Duty 15 HP Main Chopper Motor. You can process some thick cable with this baby
–    2 Separate Blowers with Vents for Dust Collection
–    The Compact BDG-2 features 220v x 3 phase
–    The BDG-2 is Fully Covered machine for with no outside access.
–    Included are 5 D2 blades, approx. 10 Inch Length on the Rotary Chopper
–    2 pc x 10 inch D2 stationary bed blades
–    The Blades are re-sharpenable
–    Multiple Bag Dust Collectors
–    Variable Frequency Drive to Adjust Shaker Table speed
–    Removable screens on Shaker Table for extra refinement
–    Amp Meter on Control Panel to view continuous AMPS draw (can tell when machine is getting overloaded)
–    Can process both Copper and Aluminum Scrap Wire
–    Extra set of blades to allow for sharpening and not lose production
–    And more goodies such as toolbox, extra screens, etc

Video Gallery