Description

Wet blast cabinet

Wet blast cabinets are designed for wet blasting cleaning. There is a wide range from small manual cabinets suitable for automotive workshops to large automatic machines used for special applications, such as the surface preparation of wire and extruded products and also automatic cleaning of complex components and dies.

Wet blasting provides extremely consistent and reproducible surface treatment to clean, degrease, descale etc. or polish various products of various geometry and material (from plastic and soft metals to steel or exotic materials) without the use of harsh chemicals or dusty mechanical action.

Our wet blasting process is a solvent and dust-free blasting process and is safe also for the operator. Abrasive solution is a special mix of water and media, sometimes also a special detergent. This mix is projected at the work piece through an advanced blast nozzle.

Because no solvents or other potentially hazardous chemicals are used by the wet blast process, it is not subject to any solvent or dust emission legislation.

Advantages,

• Greatly improving the dust pollution of the environment, and reduce the health hazards to workers.
• No need to equip the ventilation and dust removal equipment and a separate blast room can directly install in the production line, to save production areas, good to the turnover of the workpieces.
• Flexible working methods, variable process parameters, can adopt to finish process requirements of different materials and different precision parts.
• The surface quality improves after processing, at a reasonable selection of process parameters conditions, reduce the roughness one level after sandblasting.
• The surface of workpieces will harder after sandblasting, to improve the wear resistance and fatigue strength.
• In the working, the abrasives can recycling use, small consumption.
• The main parts with long service life, and easy to maintain.

  Wet Blast Cabinet (Power; 120V xSingle Phase x 60 HZ )

  Model	Operating Area(mm)	Total size(mm)	Compressed Air Supply	Power	Fabricate Material
  RD-SB-9090W	35 x 35 x 29.5″	40 x 55 x 72″	0.8-1.2m³/min; 3-7bar(kg/cm2)	120v x 60 HZ	Glass Fiber Reinforced Plastics